Question: What Is A Hex Key Used For?

Can you use hex instead of Torx?

We actually don’t recommend using your torx wrenches in place of a hex key or Allen wrench.

With that being said, torx size, T9, won’t doesn’t really work with any of the SAE hex sizes.

However, it’s actually a perfect match for metric size, 2.5 mm..

How do you fix a stripped Allen key?

Clean out the hex hole in the bolt head with a small screwdriver to remove any caked dirt, insert the Allen-key socket, tap it with a small hammer to be certain it’s fully seated in the hole, squeeze the trigger on the impact wrench, and whacketawhacketaWHEEE—out it comes without any drama.

Are Torx and hex the same?

However, Torx keys have a six-pointed star-like shape, instead of the six flat sides of a hex key. Unlike hex keys, which usually have a hexagonal cross-section along their entire length, Torx keys frequently have a circular cross-section, with the Torx shape only appearing at the ends of the tool.

How do you use a hex key?

When you need to use the Allen wrench, stick the short end of the L shape into the bolt head and press down on the longer side of the L to turn the bolt. Of course, the Allen wrench will only fit in a hex bolt (a bolt with six sides), so don’t try using the Allen wrench to screw in any other type of fastener.

How do I get an Allen key?

How to Make an Emergency Hex Key / Allen WrenchStep 1: Materials: 1) A Pencil (hexagonal barrel) 2) A Knife. … Step 2: Make. Cut off the end of the pencil. … Step 3: Big Emotional Payoff! Insert your new allen wrench into the bolt head.

Is Torx better than hex?

By design, Torx head screws resist cam-out better than Phillips head or slot head screws. … The Torx design allows for a higher torque to be exerted than a similarly sized conventional hex socket head without damaging the head and/or the tool.

Are Allen and hex the same?

Hex keys and allen wrenches are essentially the same tools. The “key” end of allen keys is a hexagon, or six-sided, shape.

What can I use instead of a hex key?

Screwdrivers Sometimes you can use small types of flathead screwdrivers as a hex wrench by putting the end in the socket so that the two edges of the screwdriver work as leverage in the hole to turn it. The wider the socket on the bolt or nut, the wider the flathead screwdriver you will want to use.

How do you remove a hex screw without a hex key?

By adding a couple of nuts to the threaded end and locking them tightly together, you can place the head of the bolt into the head of the hex bolt and then use a spanner on the nut or grips on the threads to turn the bolt which in turn will spin the hex bolt.

What does a hex key do?

A hex key, Allen wrench or Allen key, is a simple tool used to drive bolts and screws with hexagonal sockets in their heads.

What is a hex screw?

Hex bolts, or hex cap screws, are large bolts with a six-sided head (hexagonal!) used to fasten wood to wood, or metal to wood.

What does a hex screw look like?

A hex key, also known as an Allen key or Allen wrench, is a small handheld tool that’s used for for driving bolts and screws with a hexagonal socket. They are available in many different sizes, though they all have the same hexagonal-shaped tip.

How many Allen key sizes are there?

050″, 1/16″, 5/64″, 3/32″, 7/64″, 1/8″, 9/64″, 5/32″, 3/16″, 7/32″, 1/4″, 5/16″, and 3/8″. Metric – 0.7mm, 0.9mm, 1.3mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 7.0mm, 8.0mm, 10.0mm. Great addition to any toolbox includes hard to find sizes.

What is ball end hex key used for?

The ball end makes it easier to slide the key into the receiving slot. It allows you to reach at an offset 30 degree angle so that you can feel your way to the needed position much faster – great for blind or difficult areas to reach or if the bolt or screw is close to an obstruction on one side.